|
Posted by Rich Wells, N2MCA on March 04, 2001 at 07:20:30:
In Reply to: Re: WinScan 780 recording question posted by George on March 03, 2001 at 17:03:23:
You need to find the mixing control panel for all of your volume
settings. If you have a little speaker icon in the lower right
corner of your Windows desktop task bar, double click on it. You
can also look for it under the Program Manager (Windows Explorer)
by click on Start, then Program, then look around for one titled
Volume Control. You can also look in the Control Panel as well.Once there you will find sliding controls to adjust how much of
the input from a device is sent to the speaker system. You'll
want to mess with the Mic and Line sliders and perhaps the Master
Control. Ideally, you shouuld be patching the Line or Tape Output jack of
the radio to the Line In of the PC Sound Card (since they are
matched for low voltage audio signals). Then make sure the Line
volume slider is set appropriately as mentioned above.
|
